Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-2269008.png)
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
10. Install the rear safety belt guide cover.
NOTE: If the safety belt guide cover is damaged or if it does not remain in position, install a new cover.
11. Raise the second row seat backrest.
12. Install the safety belt anchor.
1
Position the safety belt anchor.
2
Using the special tool, install the bolt.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.