Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-2298002.png)
4. Pivot the seat cushion forward.
NOTE: LH side shown, RH side similar.
5. Remove the safety belt anchor.
1
Using the special tool, remove the bolt.
2
Remove the safety belt anchor.
6. From behind the rear safety belt guide cover, release the retaining tabs, slide the cover up and remove it.
NOTE: The rear safety belt guide has been removed for clarity.
7. Remove the rear safety belt guide.
1
Using the special tool, remove the bolt.
2
Remove the safety belt guide.