Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-1986003.png)
8. Remove the upper engine insulator bracket bolt.
9. Remove the A/C line support nut.
10. NOTE: The engine isolator bracket is shown removed for clarity.
Remove the engine insulator.
1
Remove the nut.
2
Remove the bolt and the engine insulator.
11. Remove the power steering pump bracket.
1
Remove the pressure line bracket screw.
2
Remove the six nuts.
3
Remove five bolts and the power steering pump bracket.