Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
18. Remove the wheel knuckle cam bolt.
1
Mark the position of the adjustment cam notch.
2
Remove the wheel knuckle cam bolt.
19. Remove the wheel knuckle.
1
Remove the wheel knuckle cam.
2
Remove the wheel knuckle.
20. Remove the brake backing plate from the wheel knuckle.
1
Remove the bolts.
2
Remove the brake backing plate from the wheel knuckle and position aside.
Installation
All vehicles
1. Using the special tools, install a new wheel bearing into the wheel knuckle.