Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-1547002.png)
Remove the transaxle drain plug and drain the fluid.
4. Remove the RH halfshaft.
5. If equipped remove the PTO.
6. If the vehicle is equipped with a PTO, use the special tools to remove the RH differential seal.
7. If the vehicle is not equipped with a PTO, use the special tools to remove the RH differential seal.
Installation
1. If the vehicle is equipped with a PTO, use the special tools to install the RH differential seal.
2. If the vehicle is not equipped with a PTO, use the special tools to install the RH differential seal.
3. If equipped install the PTO.
4. Install the RH halfshaft.