Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
5. Connect the gearshift cable to the gearshift lever.
1
Attach the gearshift cable to the steering column bracket.
2
Connect the gearshift cable to the gearshift lever.
6. Position a 0.6 mm (0.023 inch) feeler gauge between the gearshift lever selector and the gearshift lever detent.
7. Place the gearshift lever in the DRIVE position and hang a 1.4 kg (3 lb) weight from the gearshift lever.
8. Loosen the gearshift cable adjuster to adjust the cable then tighten.
9. Install the lower steering column shroud.
1
Position the lower steering column shroud.
2
Install the screws.