Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
14. Use a soft-face hammer to separate the outboard CV joint by gently tapping it off the halfshaft.
15. Remove the halfshaft bearing retainer circlip and discard.
16. Slide the outboard halfshaft boot off of the halfshaft.
Assembly
NOTE: Make sure all components are clean and free of foreign material.
1. Lubricate the outboard CV joint with Ford High Temperature Constant Velocity Joint Grease E43Z-19590-A or equivalent meeting Ford
specification ESP-M1C207-A.