Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Seals and Gaskets: Service and Repair
Transfer Case Inner Halfshaft Seal
Transfer Case Inner Halfshaft Seal
Special Tool(s)
Removal
1. Drain the transfer case.
2. Remove the transfer case.
3. Remove the transfer case vent tube.
^
Remove the two bolts.
4. Remove and discard the dust shield.
5. CAUTION: The transfer case cover is located to the case using two hollow dowels. Remove the cover squarely from the dowels to avoid
cracking the cover bosses.
Remove the bolts and the transfer case cover.