Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-2895001.png)
Wiper Motor: Service and Repair
Windshield Wiper Motor
WINDSHIELD WIPER MOTOR
REMOVAL
1. Remove the cowl top vent panels.
2. Remove the wiper mounting arm and pivot shaft.
1
Disconnect the electrical connector.
2
Remove the bolts.
3
Remove the wiper mounting arm and pivot shaft.
3. Remove the windshield wiper motor.
1
Remove the bolt and windshield wiper motor linkage.
2
Remove the windshield wiper motor mounting bolts.
3
Remove the windshield wiper motor.
INSTALLATION
1. To install, reverse the removal procedure.