Escape 4WD V6-3.0L (2008)
2. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn
from the seat cushion foam pad.
Unzip the cushion trim cover zipper.
3. Invert and remove the cushion trim cover.
4. Remove the 2 bolts and the cushion pivot upper link.
-
To install, tighten to 40 Nm (30 lb-ft).
5. Remove the 2 cushion hinge floor bracket bolts and cushion support-to-floor bracket.
-
To install, tighten to 40 Nm (30 lb-ft).
6. To assemble, reverse the disassembly procedure.
Seat Cushion - Driver
SEAT CUSHION - DRIVER
