Escape 4WD V6-3.0L (2008)
Brake Pedal Assy: Service and Repair
Brake Pedal and Bracket
Brake Pedal and Bracket
Removal and Installation
1. CAUTION: Do not service the brake pedal or brake booster without first removing the stoplamp switch and speed control deactivator
switch. These switches must be removed with the brake pedal in the at-rest position. Switch plungers must be compressed for the switch
to rotate in the bracket. Attempting to remove the switch when the plunger is extended (during pedal apply) will result in damage to the
switch.
Remove the stoplamp switch.