Escape 4WD V6-3.0L (2008)
^
Remove the battery junction box (BJB) fuses 24 (50A) and 31 (50A).
3. CAUTION: Do not allow the caliper to hang from the brake hose or damage to the hose can occur.
Remove the 2 brake caliper guide pin bolts and position the caliper aside.
^
To install, tighten to 35 Nm (26 lb-ft).
^
Support the caliper using mechanic's wire.
4. Remove the brake pads from the brake caliper.
5. To install, reverse the removal procedure.