Escape 4WD V6-3.0L (2008)
Heater Core: Service and Repair
HEATER CORE
Removal and Installation
NOTE:
-
If a heater core leak is suspected, the heater core must be leak tested before the heater core is removed.
-
Use only the approved coolant for this vehicle.
1. Remove the heater core and evaporator core housing.
2. Remove the dash panel seal.
3. Remove the heater core bracket screw and the heater core bracket.
-
To install, tighten to 3 Nm (27 lb-in).
4. Remove the heater core.
5. To install, reverse the removal procedure.
