Escape 4WD V6-3.0L (2008)
4. Using the special tool, remove the crankshaft pulley.
Installation
1. Lubricate the crankshaft front seal inner lip with clean engine oil.
2. NOTE: Clean the keyway and slot using metal surface cleaner before applying silicone gasket and sealer.
NOTE: The crankshaft pulley must be installed and the bolt tightened within 4 minutes of applying the silicone gasket and sealer.
Apply silicone gasket and sealant to the end of the keyway slot.
3. NOTE: Lubricate the outside diameter sealing surface with clean engine oil.
Using the special tool, install the crankshaft pulley.
