Escape 4WD V6-3.0L (2008)
4. Position the exhaust Y-pipe gasket.
5. Position the exhaust Y-pipe and install the 4 new exhaust Y-pipe nuts.
^
Tighten the nuts to 47 Nm (35 lb-ft).
6. NOTE: Make sure to apply anti-seize lubricant to the threads of the HO2S before installation
Using the special tool, install the HO2S.
^
Tighten to 47 Nm (35 lb-ft).
7. Install the passenger side splash shield and the 5 bolts.
8. Connect the LH HO2S and catalyst monitor sensor electrical connectors.