Escape 4WD V6-3.0L (2008)
Installation
1. Install the coolant pump belt on the coolant pump pulley and position it on the camshaft pulley.
2. Remove the pin-type retainer, 5 bolts and the RH lower splash shield.
3. CAUTION: Do not use any screwdrivers, pliers or other metal objects that could cause damage to the belt or camshaft pulley while
installing the belt.
Rotate the crankshaft clockwise to seat the coolant pump belt on the camshaft pulley.
4. Install the RH lower splash shield, pin-type retainer and 5 bolts.
^
Tighten to 9 Nm (80 lb-in).