Escape 4WD V6-3.0L (2008)
Canister Purge Control Valve: Service and Repair
EVAPORATIVE EMISSION CANISTER PURGE VALVE
Removal and Installation
1. Disconnect the evaporative emissions (EVAP) canister purge valve electrical connector.
2. Disconnect the 2 fuel vapor tube-to-EVAP canister purge valve quick connect couplings.
3. Depress the tab and remove the EVAP canister purge valve from the bracket.
4. To install, reverse the removal procedure.
-
Carry out the evaporative emission system leak test. See: Testing and Inspection
-
Carry out the evaporative emissions repair verification drive cycle.