Escape 4WD V6-3.0L (2008)
2. NOTE: If equipped with a moonroof and/or rear window wiper assembly, make sure of correct moonroof drain hose and/or rear window solvent
hose routing.
Install the safety canopy rear hook.
3. Hook the safety canopy module to the C-pillar.
4. Install the 2 safety canopy module bolts located near the top of the A- and B-pillars.
-
Tighten to 8 Nm (71 lb-in).
5. Attach the A-pillar tether pin-type retainer to the A-pillar.
6. NOTE: If equipped with a moonroof and/or rear window wiper assembly, do not pinch the front moonroof drain hose and/or rear window washer
solvent hose.
Install the A-pillar tether bolt.
-
Tighten to 8 Nm (71 lb-in).
7. Install the 2 safety canopy module bolts near the top of the C-pillar and between the B- and C-pillars.
-
Tighten to 8 Nm (71 lb-in).
