Escape 4WD V6-3.0L (2008)
11. NOTE: Do not discard the gasket. It is a reusable type. Inspect the gasket for damage. Install a new gasket as necessary.
Remove the main control cover gasket.
Installation
All vehicles
1. NOTE: The main control cover gasket is a reusable type. Inspect the gasket for damage. Install a new gasket as necessary.
Install the main control cover gasket.
2. NOTE: Install studs in locations 3 and 11.
Install the main control cover. Tighten to 13 Nm (10 lb-ft), in the sequence shown.