Escape 4WD V6-3.0L (2008)
Valve Body: Removal and Replacement
Main Control Valve Body
Material
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to maintenance/Service and Repair.
3.0L engine
2. Drain the engine coolant. For additional information, refer to Cooling System.
All vehicles
3. Remove the battery and tray.
4. Disconnect the wiring harness from the battery tray bracket.
5. Remove the battery tray bracket.
6. Disconnect the transaxle wiring harness electrical connector and the transmission range (TR) sensor electrical connector.
