Escape 4WD V6-3.0L (2008)
Pinion Flange: Service and Repair
Drive Pinion Seal
Special Tool(s)
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Index-mark the driveshaft flange and the pinion flange.
3. NOTE: Support the driveshaft.
Disconnect the rear driveshaft universal joint flange.
^
Remove and discard the 4 bolts.
^
Position aside the driveshaft and flange.
