Escape 4WD V6-3.0L (2008)
4. Install the 4 gearshift lever nuts.
^
Tighten to 25 Nm (18 lb-ft).
5. Adjust the gearshift cables.
6. Install the floor console finish panel.
7. Install the gearshift lever knob and boot assembly.
4. Install the 4 gearshift lever nuts.
^
Tighten to 25 Nm (18 lb-ft).
5. Adjust the gearshift cables.
6. Install the floor console finish panel.
7. Install the gearshift lever knob and boot assembly.