Escape 4WD V6-3.0L (2008)
3
Install the driven gear.
3. CAUTION: The power transfer unit (PTU) cover and case sealing surfaces must be free of oil before applying new sealant.
Apply a 3 mm (0.11 in) bead of silicone sealant to the sealing surface of the power transfer unit (PTU) cover. Install the PTU cover and tighten the
11 PTU cover bolts in a star pattern.
4. Install the PTU vent tube and the 2 PTU vent tube bolts.
^
Tighten to 14 Nm (10 lb-ft).
5. Using the special tools, install the halfshaft seal. The seal is correctly installed if it is flush with the PTU case cover.
6. Install the halfshaft seal dust cover.
^
Press the dust shield firmly to snap into position.
7. Using the special tools, install the intermediate shaft seal.
