Escape 4WD V6-3.0L VIN 1 (2005)
Escape Is Shown, Mariner Is Similar (Part 2)
Exploded Views
Special Tool(S)
Special Tool(s)
Removal and Installation
1. Remove the rear bumper cover.
2. Remove the 4 rear bumper nuts.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Remove the rear bumper.
4. If necessary, remove the rivets and the rear bumper isolator.
-
Use the special tool to install the new rivets.
5. To install, reverse the removal procedure.