Escape 4WD V6-3.0L VIN 1 (2005)
1. Install the water pump belt on the water pump pulley and position it on the camshaft pulley.
2. CAUTION: Do not use any screwdrivers, pliers or other metal objects that could cause damage to the belt or camshaft pulley while installing the
belt.
Rotate the crankshaft clockwise to seat the water pump belt on the camshaft pulley.
3. Install the coolant pump belt shield and the nuts.
^
Tighten to 6 Nm (53 inch lbs.).
4. Install the RH splash shield and the bolts.
^
Tighten to 7 Nm (62 inch lbs.).