Escape 4WD V6-3.0L VIN 1 (2005)
22. From under the rear of the passenger seat, slide and disengage the passenger seat side air bag module electrical connector locking clip, and then
release the tab and disconnect the passenger seat side air bag module electrical connector.
23. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger seat side air bag module electrical connector.
24. From under the rear of the driver seat, slide and disengage the driver seat side air bag module electrical connector locking clip, and then release
the tab and disconnect the driver seat side air bag module electrical connector.
25. Attach the restraint system diagnostic tool to the vehicle harness side of the driver seat side air bag module electrical connector.
All vehicles
26. Install the RCM fuse F33 (15A) to the SJB.
27. Connect the battery ground cable.