Escape 4WD V6-3.0L VIN 1 (2005)
![background image](/ford/escape_4wd/v6-3.0l_vin_1/Page-1362004.png)
If installing a new converter, install the HO2S using the special tool.
^
Tighten to 47 Nm (35 ft. lbs.).
6. Connect the HO2S electrical connector.
7. Install the dual converter Y-pipe.
8. Install the generator.
If installing a new converter, install the HO2S using the special tool.
^
Tighten to 47 Nm (35 ft. lbs.).
6. Connect the HO2S electrical connector.
7. Install the dual converter Y-pipe.
8. Install the generator.