Escape 4WD V6-3.0L VIN 1 (2005)
![background image](/ford/escape_4wd/v6-3.0l_vin_1/Page-1374002.png)
-
Apply oil to the EVAP canister vent solenoid O-ring seal prior to installation.
6. To install, reverse the removal procedure.
7. Carry out the evaporative emission system leak test. See: Testing and Inspection/Evaporative Emission System Leak Test
8. Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Evaporative Emission Repair Verification Drive
Cycle