Escape 4WD V6-3.0L VIN 1 (2005)
EGR Tube: Service and Repair
EXHAUST MANIFOLD TO EXHAUST GAS RECIRCULATION (EGR) VALVE TUBE
Exploded View
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Carefully detach the differential feedback exhaust gas recirculation (EGR) system sensor vacuum tubes and position the sensor aside.
3. Disconnect the exhaust manifold-to-EGR tube fitting from the EGR valve.
-
To install, tighten to 40 Nm (30 lb-ft).
4. Disconnect the exhaust manifold-to-exhaust EGR tube fitting from the RH exhaust manifold.
-
To install, tighten to 40 Nm (30 lb-ft).
5. Remove the EGR valve tube.
6. To install, reverse the removal procedure.