Escape 4WD V6-3.0L VIN 1 (2005)
EGR Valve: Service and Repair
EXHAUST GAS RECIRCULATION (EGR) VALVE
Exploded View
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the exhaust manifold-to-exhaust gas recirculation (EGR) tube fitting from the EGR valve.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Disconnect the vacuum tube fitting from the EGR valve.
4. NOTE:
-
The EGR valve sealing surfaces are soft metals.
-
Do not reuse the EGR valve gasket.
Remove the 2 bolts and the EGR valve.
-
Remove and discard the EGR valve gasket.
-
Carefully clean the EGR valve sealing surfaces.