Escape 4WD V6-3.0L VIN 1 (2005)
10. If the vehicle is equipped with a moonroof, connect the moonroof rear drain hose.
11. Connect the safety canopy module electrical connector and attach the connector to the D-pillar.
12. Install the safety canopy module wiring clip to the roof panel brace.
13. Install the remaining 2 safety canopy module bolts near the ignitor (between the C and D-pillars).
-
Tighten to 8 Nm (71 lb-in).
14. Install the headliner.
15. Repower the system.