Escape 4WD V6-3.0L VIN 1 (2005)
6. Loosen the special tool bolt.
^
When the spring tension is released, remove the special tool.
7. Install the transmission fluid cooler line and bolt.
^
Tighten to 13 Nm (10 ft. lbs.).
8. Install the LH splash shield and the 7 retainers.
^
Tighten to 10 Nm (89 inch lbs.)..
9. Start the vehicle. Place the transmission range selector lever in each gear and allow to engage. Check for leaks.
10. Check the transmission fluid.