Escape 4WD V6-3.0L VIN 1 (2005)
![background image](/ford/escape_4wd/v6-3.0l_vin_1/Page-1721003.png)
3. Connect the gearshift cable.
4. Install the 2 gearshift cable grommet nuts.
^
Tighten to 10 Nm (89 inch lbs.).
5. CAUTION: Make sure the clips are set completely within the cable adapter groove and fully seated.
Install the 2 gearshift cable clips.
6. Connect the gearshift cables to the transaxle gearshift control assembly.
7. Adjust the gearshift cables.
8. Install the floor console.