Escape AWD V6-3.0L VIN 1 (2004)
Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.
18. Connect the driver air bag module electrical connector.
19. Install the steering wheel access cover.
20. Connect the battery ground cable.
21. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the air bag system. See: Air Bag(s) Arming and Disarming/Service and
Repair/Prove Out Procedure
22. Check the restraint system for correct operation.
