ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Camshaft Position Sensor > < Component Tests|Page 2111
Page 1
background image

Brake On/Off (BOO) Switch: Service and Repair

1. Disconnect the Brake ON/OFF (BOO) switch electrical connector.
2. Loosen the BOO switch locknut.
3. Remove the BOO switch from the brake pedal assembly.
4. Reverse procedure to install. Adjust brake pedal free height and tighten the BOO switch locknut to 14-17 Nm (10-13 lb ft). See: Adjustments

Camshaft Position Sensor > < Component Tests|Page 2111