Escort L4-110 1.8L DOHC (1994)
Throttle Cable/Linkage: Adjustments
Accelerator Pedal Limiter
Accelerator Cable Bracket
1.
Use a 17mm wrench to loosen the locknut on the limiter bolt.
2.
Adjust the limiter, using a 14mm wrench, in to increase pedal travel, out to decrease travel.
3.
While holding the limiter with the 14mm wrench, tighten the locknut using the 17mm wrench.
4.
Check the accelerator cable deflection and wide open throttle position. Adjust, if necessary. refer to Adjustments.
