Escort L4-110 1.8L DOHC (1994)
Seat Belt Guide Track: Service and Repair
1. Disconnect shoulder belt from carrier, then cycle carrier to the B-pillar (ON position).
2. Disconnect battery ground cable.
3. Remove A to B pillar trim panel, then the B-pillar trim panel.
4. Disconnect front limit switch electrical connector.
5. Disconnect two motor electrical connectors.
6. Remove all track and motor assembly mounting bolts and capscrews.
7. Remove track and motor assembly.
8. Reverse procedure to install, noting the following:
a. Position track and motor assembly into position and install one track mounting bolt to hold in position.
b. Connect two motor electrical connectors.
c. Install motor mounting bolts, two track mounting bolts at rear limit switch, then the track mounting capscrews at the B-pillar.
d. Install all remaining track mounting bolts and capscrews.
