Escort L4-110 1.8L DOHC (1994)
Ignition Switch: Customer Interest
Ignition Switch - Harness Connector Non-Mating
Article No.
94-19-7
09/21/94
IGNITION SWITCH - NON-MATING CONDITION BETWEEN 14401 HARNESS CONNECTOR ASSEMBLY AND IGNITION SWITCH -
"NEW" SPACER FOR ATTACHING IGNITION WIRING CONNECTION TO SWITCH - VEHICLES BUILT AFTER 5/20/94 - SERVICE TIP
FORD:
1994 CROWN VICTORIA, ESCORT, MUSTANG, TAURUS, TEMPO, THUNDERBIRD
LINCOLN-MERCURY:
1994 CONTINENTAL, COUGAR, GRAND MARQUIS, SABLE, TOPAZ, TOWN CAR, TRACER
LIGHT TRUCK:
1994 AEROSTAR, BRONCO, EXPLORER, F-150-350 SERIES, F-47, RANGER, VILLAGER
ISSUE:
Some vehicles may need re-work of the 14401 wiring harness. While attaching the harness connector to the ignition switch, a non-mating condition may
occur. This is due to a design revision (larger tower on switch) of the ignition switch, and not having the proper spacer to clear the switch tower.
ACTION:
While re-working any 14401 harness (on affected vehicles built after 5/20/94), determine if the correct spacer (F4TB-14A468-CA) is attached to the
ignition switch connector. The correct spacer will allow the "old" or "new" 14A464 connector to mate with the ignition switch assemblies
F2DC-11572-AA or F4DC-11572-AA. Refer to the following service procedures.
SERVICE PROCEDURE
