Escort L4-110 1.8L DOHC (1994)
4. Press the front hub out of the steering knuckle using an appropriate removal tool.
NOTE: If the bearing inner race remains on the hub, use a grinder to grind a section of the bearing inner race until only 0.5mm (0.020 inch)
remains. Remove the inner race with a chisel.
5. Remove the E-clip from the steering knuckle.
6. Position the steering knuckle onto a press.
7. Using an appropriate bearing remover, press the bearing out of the steering knuckle.
Front Hub / Steering Knuckle Disassembly
CAUTION: If the dust cover is removed, a new dust cover must be installed.
8. Scribe a mark in the dust cover and steering knuckle.
9. Using a chisel, remove the dust cover.
Front Hub / Steering Knuckle Disassembly
NOTE: Do not remove the wheel studs from the hub if the wheel studs are not damaged.