ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Freeplay|Page 3345 > < Bleeding Procedure|Page 3340
Page 1
background image

Clutch Pedal Assembly: Adjustments
Freeplay

ADJUSTMENT 

NOTE:  To determine if the pedal freeplay requires adjustment, depress clutch pedal by hand until clutch resistance is felt. Measure the distance
between upper pedal height and where the resistance is felt. Freeplay should be 0.20-0.51 inch. Use the following procedure if adjustment is necessary.

1. Loosen clutch pedal push rod locknut.
2. Turn push rod until pedal freeplay is within specification.
3. Check that disengagement height is correct when the pedal is fully depressed. Minimum disengagement height is 1.6 inches.
4. Torque push rod locknut to 9-12 ft lbs.

Freeplay|Page 3345 > < Bleeding Procedure|Page 3340