ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cruise Control > < Body - Water Leak Identification/Correction Tips|Page 6609
Page 6
background image

Figure 8

6.

Inspect the joints in the quarter panel inner to outer areas for sealer skips, Figure 8. Seal as required, with clear silicone rubber adhesive
(D6AZ-19562-AA).

Figure 9

7.

If the leak is under the weatherstrip, proceed as follows:

a.

Remove the weatherstrip.

b.

Apply weatherstrip adhesive (E8AZ-19552-A) to the tip of the sheet metal flange at points where no sealer is evident, Figure 9.

c.

Seal areas where the outer flange is shorter than the inner flange.

d.

Re-install the weatherstrip.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:

1200, 1300, 1500, 1800

Cruise Control > < Body - Water Leak Identification/Correction Tips|Page 6609