Escort L4-116 1.9L SOHC HO (1989)
Seat Belt Retractor Limit Switch: Service and Repair
Removal and Installation
1. Disconnect switch from wiring harness.
2. Using an ohmmeter such as Rotunda Digital Volt Ohm Meter 007-00001 or equivalent, probe across connector terminals.
NOTE: Switch is normally closed (with plunger in free extended position). Switch must open when plunger is depressed.
3. Remove Torx(R) bolt and move spacer downward. This will allow limit switch removal.
4. To install, reverse Steps 1, 2 and 3.
