Escort L4-116 1.9L VIN 9 2-bbl (1986)
Weatherstrip: All Technical Service Bulletins
Cowl/Dash/Windshield/Drip Rail Areas - Water Leaks
Article No. 86-25-3
LEAKS - WATER - COWL/DASH, WINDSHIELD AND DRIP RAIL AREAS - BODY SEALING TIPS
FORD 1986-87 ESCORT, EXP
LINCOLN-MERCURY 1986-87 LYNX
Water leaks in the cowl/dash, windshield and drip rail areas may be located and corrected by using the following, illustrated, general service tips and the
sealing materials listed below:
General Service Tips
An inspection should be made for damaged, distorted, or misaligned weatherstrips around doors and windows. Check for sealer skips in the header joints
at the top of all door openings and, in and around the drip rail. Always inspect visible areas for potential leaks, prior to any disassembly of component
parts.
1.
When the location of the leak has been found, select the proper sealer or adhesive for the repair.
2.
Before applying any sealer of adhesive, the repair area must be free of dirt, wax, etc. so that adhesive will stick.
3.
Always use clear sealer when the joint or seam is visible to the customer. Clean excess sealer from repaired area for neat appearance at joint or
seam.
4.
Allow enough time for the adhesive or sealer to dry, then water test to make sure leaking has stopped.
Figure 2
LOCATIONS OF WATER ENTRY:
Upper Windshield Area
1.
Roof panel to "A" pillar joint, Figure 2.