Escort L4-116 1.9L VIN J FI HP (1988)
(SEE NOTE BELOW)
2
E3EC-5560-AA
1
E6EC-5560-BA
NOTE:
VEHICLES WITH SUSPENSION HEIGHT MEASUREMENTS BELOW 2.25 INCHES DO NOT REQUIRE A SPRING CHANGE.
Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it
with a clear plastic decal shield.
REAR SHOCK/STRUT REPLACEMENT:
1987-1988 1/2 Escort/EXP (non GT/Sport) and 1987 Lynx (non XR3)
1.
Before proceeding, make sure the rear suspension height measurements have been taken and any necessary rear spring changes completed.
2.
Replace both the right rear and left rear shock/struts with service kit part (E9FZ-181258-E).
3.
Refer to the appropriate Car Shop Manual, Section 14-35 for service details
REAR SPRING REPLACEMENT:
1989 Escort (non GT)
1.
Replace both left rear and right rear coil springs according to the following Rear Spring Selection Charts based on vehicle model.
2.
Refer to the 1989 Car Shop Manual, Page 14-35-6 for removal and installation procedures.
Figure 3
REAR SPRING SELECTION CHART
1989 ESCORT SEDAN & STATION WAGON
STOCK R. SPRING
SERVICE
SERVICE
SERVICE
CODE ON DOOR VIN
SPRING
SPRING
SPRING
TAG (SEE FIG.3)
3-DOOR SEDAN
5-DOOR SEDAN
WAGON