Escort L4-121 2.0L SOHC VIN P SFI (2002)
10. Apply a bead of Urethane Sealant Essex 400-HV or Essex U-216, which meets Ford specification WSB-M2G316-B to the pinch weld on top of
the existing bead of urethane.
CAUTION: If vehicle is to be driven within 24 hours of urethane application, Urethane Sealant Essex U-216 meeting the Ford specification
WSB-M2G316-B must be used due to its one hour cure time.
11. Use the bottom spacers and alignment marks to install the windshield glass.
CAUTION: Open the windows slightly to prevent the windshield glass from being pushed out by air pressure when a door is closed.
12. After the urethane sealant has cured, check for water leaks and add Urethane Sealant Essex U-400 HV or Essex U-216 where needed.
13. Install the front portion of the headliner.
14. Install the interior rear view mirror.
15. Install the cowl grille.