ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Antitheft and Alarm Systems > < Impact Sensor|Description and Operation
Page 1
background image

Antenna Cable: Service and Repair

REMOVAL

1. Remove the integrated control panel.
2. Remove the console panel.

3. Remove the radio antenna lead-in cable from the wiring insulator.

4. Disconnect the radio antenna lead-in cable from the antenna lead.

5. Open the harness clip and pull the radio antenna lead-in cable out.

INSTALLATION

1. To install, reverse the removal procedure.

Antitheft and Alarm Systems > < Impact Sensor|Description and Operation