ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Starting and Charging > < Wheel Speed Sensor|Front|Page 5336
Page 2
background image

5. Disconnect the rear anti-lock brake sensor wire from the lower harness clip.

6. Remove the rear anti-lock brake sensor.

1

Remove the bolt.

2

Remove the rear anti-lock brake sensor.

Installation 

1. NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive

strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn its strategy.

2. To install, reverse the removal procedure.

Starting and Charging > < Wheel Speed Sensor|Front|Page 5336