ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Powertrain Management > < TFI IV Ignition Module
Page 1
background image

Ignition Control Module: Service and Repair
TFI I Ignition Module

Exploded View Of TFI Ignition System Distributor.

Removal

1.

Remove distributor as described under Distributor, Replace.

2.

Remove two screws attaching TFI module to distributor housing, Fig. 2.

3.

Pull righthand side of module downward toward distributor mounting flange, then up to disengage module terminals from connector in distributor
base. Pull toward flange and away from distributor.

Installation

1.

Apply a 1/32 inch thick coating of silicone grease D7A2-19A331-A or equivalent to metal base of TFI module.

2.

Position TFI module on distributor mounting flange.

3.

Carefully position TFI module toward distributor base to securely engage the three distributor connector pins.

4.

Install two TFI module attaching screws and torque to 9 to 16 inch lbs. on 1982-84 models, or 16---35 inch lbs. on 1985---86 models.

5.

Install distributor as described under Distributor, Replace.

Sensors and Switches - Powertrain Management > < TFI IV Ignition Module