Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Brake Bleeding: Service and Repair
Brake System Gravity Bleeding
1. Fill the brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification
ESA-M6C25-A, DOT 3.
2. Note: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
If equipped with rear drums, loosen the RH rear wheel cylinder bleeder screw and leave open until clear, bubble-free brake fluid flows.
3. Tighten the wheel cylinder bleeder screw.
4. Note: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
If equipped with fear disc brakes, loosen the RH rear disc brake caliper bleeder screw and leave open until clear, bubble-free brake fluid flows.
5. Tighten the rear disc brake caliper bleeder screw.