Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
3. Fill the brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ- 19542-AB or equivalent meeting Ford specification
ESA-WC25-A, DOT 3.
4. Have an assistant pump the brake pedal until clear, bubble-free brake fluid flows from both brake hoses.
5. Remove the short brake hoses and install the brake outlet lines.
Brake System Gravity Bleeding
1. Fill the brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification
ESA-M6C25-A, DOT 3.
2. Note: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
If equipped with rear drums, loosen the RH rear wheel cylinder bleeder screw and leave open until clear, bubble-free brake fluid flows.
3. Tighten the wheel cylinder bleeder screw.